How to Replace a Saab 9-3 Key
The Saab 9-3 is an excellent car that provides a lot of driver appeal. It has good visibility and an efficient engine. It also has a high safety rating.
It is crucial to have two keys that are compatible for your vehicle. It could be costly to replace a key in the event that you lose it.
How to replace the ignition Key on the Saab 9-3
You need to replace your car keys in case it isn't turning. This guide will teach you how to replace the ignition key on the Saab 9-3. You'll require a replacement key with a reprogrammable battery as well as a new key-fob case.
In contrast to older models, the majority of modern Saab cars have an electronic transponder inside the key-fob instead physical key made of metal to unlock and start the vehicle. The reprogrammable batteries that are in the key-fob inevitably get worn out, and eventually cannot hold any charge. This is particularly applicable if you are using the same key for the same lock.
The good news is that it can be replaced easily by a professional locksmith. If you have the proper tools, and a little patience you can do it yourself. The first step is to take the key-fob out. This is done by inserting a flathead screwdriver in the slot located in middle of the case. saab 9-3 key not accepted contact service is thin and easily damaged.
After the case is opened, you can make the new key by combining lower part of the key from earlier with banana and transponder. This will ensure that the new key is connected to the CIM correctly, which can be the difference in replacing the sole key for your Saab 9-3.
How to replace the ignition Key on a Saab 900
If you don't have two keys, you'll need to remove the steering wheel and dashboard to gain access to the ignition. Start by disconnecting your negative battery cable. Once the battery is disconnected, you are able to remove the trim and dashboard pieces around the steering wheel. After the dashboard has been removed, you can place a screwdriver in the opening behind the ignition switch.
The ignition cylinder has the key lock, which can prevent the vehicle from starting if key isn't inside it. If the ignition switch on your 900 isn't working, check the key to determine whether it's inside the lock or snared into the barrel of the ignition. It is also important to rotate your keys and keep them clean to prevent bending.
Saab cars differ from other vehicles because they do not have traditional keys made of metal. Instead, the car can recognize the electric signals of the key fob through a special chip embedded in it.
If you only lose one working key fob your dealer will charge an extra fee to replace your computer module (also known as the CIM). However, we can reprogram the existing computer's EEPROM and set it to accept new keys without replacing it. You'll save more than 50% on the dealer's cost! We call it the SAAB Key PROGRAM. Learn more about it here!
How do you replace the ignition Key in a Saab9-5
The metal portion of a traditional Saab key is easy to copy, and it's also not much of a barrier against vehicle theft. The electronic part of the key-fob comes with an electronic chip that detects the car when the key is put in the ignition switch.
Saab has relied on the technology of this anti-theft device for more than 10 years. It's not as effective as a physical door lock but it does make stealing your car more difficult. Every Saab owner needs to keep an extra Saab key in their vehicle.
The majority of new Saabs are delivered with two keys, however they can be added by an dealer by using a handheld device referred to as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is NG 9-3 cars, that have more modern and advanced features that require a separate key-fob to operate using a different procedure.
The dealer will replace the CIM or TWICE module in those cars if keys are lost, and they'll charge you a premium for doing it. We can however reprogram the EEPROM in your existing computer and set it up to accept new keys, without having to replace the expensive modules.
How to replace the ignition Key in a Saab XC90
It could be time to replace your SAAB key fob if it is experiencing difficulty turning the lock barrel. The process is fairly simple and you don't need to visit a dealership. You can do it at home, using a couple of simple tools.
The first step is to prepare the new key. Before you start, ensure that the anti-theft system has been disabled by placing blocks on the rear wheels, and then adjusting the handbrake. After that, put the key in the ignition and move it to the on position that activates the accessories, but does not start the engine. Repeat this five times, and then put the key on the "on" position.
Next, you'll need to buy a new case for your old key fob. They can be found at any auto parts store and they're typically quite affordable. They can be purchased without electronics based on the model.
To open the case to open the case, gently push the screwdriver with a flathead into the slot in the middle. Once you split the case, you will have access to all of the internal electronics. To remove the electronics employ a small screwdriver, and try to pry them out in a gentle manner.